Mower KDF SaMASZ
Front disc mowers KDF mounted on tractor's front 3-point linkageare
excellent alternative to rear disc mowers with regard to good visibility during work and transport.
Advantages and equipment of KDF mowers:
• Tractor's triangle in standard equipment
• PTO shaft with overrunning and friction clutch in standard equipment
• Mechanical lock for transport
•„Floating cut" – modern, extended suspension frame and springs with high pitch enable better ground following (+250 mm, - 150 mm) and regulation of proper pressure on the ground
• Hydraulic cylinders in standard equipment – facilitate manouvering and transport
• Working width indicator in standard equipment
• Safety guard of PTO shaft secures against dirt and fast wear of the shaft
• Flow dividors enable even lowering and lifting of cutting unit by means of only one hydraulic connector
• Swath width regulated by swath guides
• Quick change of rpm direction
• Effective lightening (spring or hydraulic)
• Good visibility during operation and transport
Type | KDF 260 | KDF 300 | TORO 300 | KDF 301 W | KDF 340 | KDF 390 Fortschritt | |||
Working width [m / ft] | 2,60 / 8’7” | 3,00 / 9’10” | 3,00 / 9’10” | 3,00 / 9’10” | 3,40 / 11’2” | 3,90 / 12’10” | |||
Swath width [m / ft] | ~ 0,90 - 1,10 / ~ 2’11” - 3’7” |
~ 1,30 - 1,50 / ~ 4’4” - 4’11” |
~ 1,40 - 1,70 / ~ 4’7” - 5’7” |
~ 1,40 - 1,70 / ~ 4’7” - 5’7” |
~ 1,80 /5’11” | ~ 1,60 - 2,30 / ~ 5’3” - 7’7” |
|||
Necessary hydraulic couplers | 1 x single acting | ||||||||
Number of discs [pcs.] | 6 | 7 | 7 | 7 | 8 | 9 | |||
Number of knives [pcs.] | 12 | 14 | 14 | 14 | 16 | 18 | |||
RPM | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | |||
3-point hitch cat. | II | ||||||||
Power demand [HP] | from 70 | from 80 | from 75 | from 100 | from 90 | from 82 | |||
Working capacity [acres/h] | ~ 7,00 | ~ 8,70 | ~ 8,70 | ~ 8,70 | ~ 10,00 | ~ 7,50 | |||
Weight [kg / lbs] | 805 / 1775 | 940 / 2075 | 770/ 1698 | 1215 / 2680 | 1020 / 2250 | 820 / 1810 |
Type | KDF 300 S | KDF 300 SL | KDF 340 S | KDF 340 SL | KDF 341 W | ||
Working width [m / ft] | 3,00 / 9’10” | 3,00 / 9’10” | 3,40 / 11’2” | 3,40 / 11’2” | 3,40 / 11’2” | ||
Swath width [m / ft] | ~ 1,40 - 1,70 / ~ 4’7” - 5’7” |
~ 1,40 - 1,70 / ~ 4’7” - 5’7” |
~ 1,40 - 1,80 / ~ 4’7” - 5’11” |
~ 1,40 - 1,80 / ~ 4’7” - 5’11” |
~ 1,40 - 1,80 / ~ 4’7” - 5’11” |
||
Necessary hydraulic couplers | 1 x single acting | ||||||
Number of discs [pcs.] | 7 | 7 | 8 | 8 | 8 | ||
Number of knives [pcs.] | 14 | 14 | 16 | 16 | 16 | ||
RPM | 1000 | 1000 | 1000 | 1000 | 1000 | ||
3-point hitch cat. | II | ||||||
Power demand [HP] | from 100 | from 100 | from 110 | from 110 | from 110 | ||
Working capacity [acres/h] | ~ 8,70 | ~ 8,70 | ~ 10,00 | ~ 10,00 | ~ 10,00 | ||
Weight [kg / lbs] | 1205 / 2655 | 1180 / 2600 | 1140 / 2515 | 1140 / 2515 | 1140 / 2515 |